+49 (451) 703 64 994

WAREX Valve

Vendendo qualquer produto do catálogo WAREX Valve a bons preços

Sobre o fabricante WAREX Valve

Nossa empresa não é um fabricante, distribuidor autorizado ou representante oficial da marca WAREX Valve no Português. As marcas comerciais privadas e os números de Item apresentados neste web são propriedade de seus respectivos proprietários.

WAREX Valve

Vendendo qualquer produto do catálogo WAREX Valve a bons preços

Artigo

description

Preço

WX2000

Pos. 10 Warex-butterfly valve, type DKZ110 DN 250 face to face 68 mm for mounting between flanges, drilled according to EN 1092, PN 10 body of Silumin disc of stainless steel 1.4408 shaft of stainless steel stainless steel 1.4057 or equivalent shaft sealing with o-rings bearing bush of brass sealing element of replaceable in the housing suitable for food, correspond to European regulation (EC) No. 1935/2004 additional attachments: pneumatic actuator AT 300 DR double acting air supply necessary 6,0 bar electro-pneumatic positioner PMV EP 5 single- and double acting input signal: 4-20 mA protection class: IP 66 with supply air filter - 5μ make ITV, type FIL, G 1/4" HS-Code. 84818085 for medium: air characteristics: chemical not aggressive, not sticky working pressure: pressureless max. allowable working pressure: < 0,5 bar (Ps) MAWP (note: MAWP = design pressure) max. allowable working temperature: 0 °C ... + 95 °C (Ts) MAWT ambient temp.: 0 °C ... + 50 °C (Ta) Ex-protection: No requirement Rating of butterfly-valves according PED/2014/68/EU, diagram 7 Certified module A2 The butterfly-valves are not subject to this conformity assessment test pressure: design pressure x 1,1 bar for tightness

A pedido

Saiba o preço

WX6000

Dichtmanschette aus Buna CB schwarz ableitfähig passend für DKZ103GS DN 200 Shorehärte > = 65 Kennzeichnung der Dichtmanschette mit Auftragsnummer HS-Code. 40169300 für Medium: Pulverlack Eigenschaft: rieselfähig, chemisch neutral, nicht zum Anbacken neigend Arbeits-Druck: drucklos max. zulässiger Betriebsüberdruck : < 0,5 bar (Ps) MAWP (Hinweis: MAWP = Ausl.-Druck) Betriebs-Temp.: 0 °C ... + 60 °C (Ts) MAWT Umgeb.-Temp.: 0 °C ... + 50 °C (Ta) Ex-Schutz: II 1/3 D Ex h IIIC T85°C Da/Dc X Bewertung der Absperrklappen gemäß DGRL 2014/68/EU, Diagramm 7, zertifiziertes Modul A2. Die Armaturen unterliegen nicht der Konformitätsbewertung

A pedido

Saiba o preço

1005347

AT 300 DR Pneumatischer Drehantrieb AT 300 DR doppeltwirkend erforderlicher Steuerdruck 6,0 bar HS-Code. 84123100

A pedido

Saiba o preço

WX2900

Pneumatischer Drehantrieb AT 220 DR doppeltwirkend erforderlicher Steuerdruck 6,0 bar

A pedido

Saiba o preço

DKZ110.

für Medium : Schüttgut, Pulver Eigenschaft : rieselfähig, chemisch neutral, nicht zum Anbacken neigend Arbeits-Druck : drucklos Max. zulässiger Betriebsüberdruck : < 0,5 bar (Ps) MAWP (Hinweis: MAWP = Ausl.-Druck) Betriebs-Temp. : 0° C bis +60° C (Ts) MAWT Umgeb.-Temp.: 0° C bis +50° C (Ta) Ex-Schutz : nicht gefordert Bewertung der Absperrklappen gemäß DGRL 2014/68/EU, Diagramm 7, zertifiziertes Modul A2 . Die Armaturen unterliegen nicht der Konformitätsbewertung. Absperrklappe, Typ DKZ 110, zum Einklemmen zwischen Flansche nach EN 1092, PN 10 Gehäuse aus Silumin Dichtmanschette aus Perbunan schwarz im Gehäuse auswechselbar Klappenscheibe aus Edelstahl 1.4408 für DN 50...350, sonst 1.4301 Wellen aus Edelstahl 1.4057 oder höherwertig Wellenabdichtung mittels O-Ringe Wellenlagerung in MS-Buchse

A pedido

Saiba o preço

59D

Dichtelement für Dn 200 Ventil Material - weißes Silikon. DN 200. Klappenwelle 1.440 B / 1.4057

A pedido

Saiba o preço

59APSD

Bund DKZ 110 APS / DN250 Dichtmanschette aus Buna CB Schwarz passend für DKZ 110 APS / DN 250 für Absperrklappe (im Anbau) Pos. 1501

A pedido

Saiba o preço

1005334

Pneumatischer Drehantrieb AT 150 DR doppeltwirkend erforderlicher Steuerdruck 6,0 bar Ihre Anfrage F07F10-N-17 AZNQ

A pedido

Saiba o preço

1005610

ENCODER; PARA MECANISMO DE ACIONAMENTO, DO DISJUNTOR, ALSTOM GL-318; TIPO ABSOLUTO; MATERIAL AÇO INOX; FAIXA DE MEDIÇÃO 90°; CLASSE DE EXATIDÃO ± 0,25%; FORMATO CILÍNDRICO; TORQUE MÁXIMO 20 mNm ESTÁTICO; SENSOR INDUTIVO; SENSIBILIDADE INFINITA; FORNECIDO COM CABO DE 3 m; TENSÃO NOMINAL ALIMENTAÇÃO 24 Vcc (13 - 28 Vcc); TEMPERATURA DE OPERAÇÃO -20 - 85 °C; RESPOSTA DE FREQUÊNCIA > 10 kHz (-3dB); ENTRADA(S) TENSÃO; SINAL DE SAÍDA 4 - 20 mA; GRAU DE PROTEÇÃO IP 65; CONEXÃO DE SAÍDA CABO BLINDADO COM 3 FIOS; NÍVEL DE RUIDO < 0,02% FSO; RESISTÊNCIA DE CARGA MÁXIMA 300 ohms; DIÂMETRO DO EIXO 15 mm; COMPRIMENTO DO EIXO 6 mm; FIXAÇÃO POR FLANGE; DIÂMETRO EXTERNO 35 mm; COMPRIMENTO 50 mm; COM AJUSTE DE OFFSET E GANHO; NORMA TÉCNICA APLICÁVEL IEC 61000-6-2, IEC 61000-6-3, IEC 68-2-29, IEC 68-2-6.

A pedido

Saiba o preço

EPI 140F

A pedido

Saiba o preço

DR00300U

A pedido

Saiba o preço

5113

for medium : air chemical not aggressive, not sticky working pressure : 3,0 bar max. allowable working pressure : 4,0 bar bar (Ps) MAWP (Note: MAWP = design pressure) max. allowable working temperature: 0° C to +80° C (Ts) MAWT ambient temp.: 0° C to +50° C (Ta) Ex-protection : not required Rating of butterfly-valves according PED/2014/68/EU, diagram 7 Certified module A2 The butterfly-valves are not subject to this conformity assessment Warex-butterfly valve, type: DKZ 110 for mounting between flanges, drilled in acc. to EN 1092, PN 10 body of silumin sealing element of NBR white replaceable disc of stainless steel 1.4408 shaft of stainless steel 1.4057 or equivalent shaft sealing with O-rings bearing bush of brass test pressure: design pressure x 1,1 bar for tightness DN 100 face to face: 39 mm with bare shaft, square 11 mm actuator mounting flange in acc. with DIN/ISO 5211, F05

A pedido

Saiba o preço

DN 400

Klappe face to face: 67 mm fitted with pneumatic actuator, type: AT 600.DR - double acting - air supply necessary: 6 bar with mounted 5/2-3/2 way solenoid-valve make Festo, type VSNC-FC-M52-MD-G14-FN Namur interface - 24 V DC, IP 65 - Atex: Cat. II 3 G Ex nA IIC T5/T4 X Gc Cat. II 3 D Ex tc IIIC T 95°C/105°C X Dc -20°C=< Ta =< 60° C with mounted double sensor make ifm, type IN 507A with plug contact M 12, voltage: 24 V DC incl. switch cam, protection class IP 67 3-wire, normaly open, pnp, Kat. II 3 G/D open design, without plug connector

A pedido

Saiba o preço

AT300

pneum. Drehantrieb, Typ: AT 300. DR - doppeltwirkend erforderl. Steuerdruck: 6 bar

A pedido

Saiba o preço

DKZ 103

Absperrklappe,Type DKZ103 <GS> DN 200 Baulänge 54 mm zum Einklemmen zwischen Flansche nach EN 1092, PN 10 Ausführung mit Baumusterprüfung auf Druckstossfestigkeit und Zünddurch- schlagsicherheit bis 10 bar - gemäß Baumusterprüfung BVS 19 ATEX H 035 X - als Gerät einsetzbar für KST Werte < 500 bar m/sec Prüfdruck: 13 bar auf Dichtheit Gehäuse aus Silumin mit Anschluss für Erdung Klappenscheibe aus Edelstahl 1.4408 Wellen aus Edelstahl Edelstahl 1.4057 oder höherwertig Wellenabdichtung mittels O-Ringe Wellenlagerung in Messing - Buchse Dichtmanschette aus NBR schwarz ableitf. im Gehäuse auswechselbar mit freiem Wellenende, Vkt. 22 mm Anschluss gem. DIN/ISO 5211, F10 HS-Code. 84818085

3250.69 €

a5746

Dichtungs- und Verschleißteilsatz für pneum. Drehantrieb,Typ: AT 450.DR/SC

A pedido

Saiba o preço

DN250

RC260SR fitted with pneumatic actuator, RC 260 SR087, single acting/spring close air supply necessary: 6,0 bar 7999 fitted with electro-pneum. positioner make: PMV, type: EP5EX-HPNU-23K01-PV9DA-4Z ATEX: II 2G Ex d IIB + H2 T6, Ta : +60°C II 2D Ex tD 21 T61°C 7999 Feedback unit, intrinsically safe make: PMV, type: F5IS-GU-NAM fitted with 2 proximity sensors make P+F, type NJ2-V3-N - 8 V DC Marking of the feedback unit: ATEX: II 1 G Ex ia IIC T4 Ga

A pedido

Saiba o preço

A5743

Dichtungen und Verbrauchsmaterialien für den pneumatischen Antrieb AT150 DR / SC (11 Stück)

A pedido

Saiba o preço

АТ150

pneum. Drehantrieb Typ: AT 150. DR - doppeltwirkend - erforderlicher Steuerdruck: 6 bar

A pedido

Saiba o preço

1005030

Wellendichtsatz DKZ 110/103/101/105/APS/GS passend für DN 350 - DN 400 O-Ringe aus NBR

A pedido

Saiba o preço

1005325

AT 100 DR Pneumatischer Drehantrieb AT 100 DR doppeltwirkend erforderlicher Steuerdruck 6,0 bar HS-Code. 84123100

A pedido

Saiba o preço

176496 / 2019

Rotary Valve 110 <APS> DN 300 Baulänge 78 mm zum Einklemmen zwischen Flansche nach EN 1092, PN 10 Gehäuse aus Silumin mit Anschluss für Erdung Rotor 8-flügelig aus Edelstahl AISI 316 Wellen aus Edelstahl Edelstahl 1.4057 oder höherwertig Wellenabdichtung mittels O-Ringe Wellenlagerung in in Messing - Buchse Dichtmanschette aus FPM schwarz ableitf. im Gehäuse auswechselbar pneumatisch gegen den Rotor spannbar < APS > mit freiem Wellenenden passend für Fabrikat: SEW Typ: FAF47/II2GD EDRS/80S4BE1/3GD/KCC/TF/AL

A pedido

Saiba o preço

WX3000

Dichtmanschette aus Viton schwarz - ableitfähig passend für Rotary 110 APS / DN 300

A pedido

Saiba o preço

1005337

Pneumatischer Drehantrieb AT 220 DR doppeltwirkend erforderlicher Steuerdruck 6,0 bar Ihre Art.-Nr. F07F10-N-DS-22 HS-Code. 84123100

A pedido

Saiba o preço

1005024

Wellendichtsatz DKZ 110/103/101/105VK/APS/DKZE/GS passend für DN 250 - DN 300 O-Ringe aus NBR HS-Code. 84849000

A pedido

Saiba o preço

1005613

Dichtungs- und Verschleißteilsatz für pneumatischer Drehantrieb AT 300 DR/SC

A pedido

Saiba o preço

1005978

Endschalterbox mit 2 Sensoren P+F NBN 4-12GM50-E2 pnp, mit LED gelb, 10 ... 30 V DC im Kunststoffgehäuse eingebaut + verdrahtet gem. Klemmenplan 3000654M, incl. Namur-Konsole

A pedido

Saiba o preço

5112

for medium : dusty air, smut, silicia, Fluidgroup 2 chemical not aggressive, not sticky working pressure : 5,0 bar max. allowable working pressure : 6,0 bar (Ps) MAWP (Note: MAWP = design pressure) max. allowable working temperature: 0° C to +60° C (Ts) MAWT ambient temp.: 0° C to +50° C (Ta) Ex-protection : not required Rating of butterfly-valves according PED/2014/68/EU, diagram 7 Certified module A2 The butterfly-valves are not subject to this conformity assessment Warex-butterfly valve, type: DKZ 110 for mounting between flanges, drilled in acc. to EN 1092, PN body of silumin sealing element of NBR white - not greased - replaceable disc of stainless steel 1.4408 for DN 50...350, otherwise 1.4301 shaft of stainless steel 1.4057 or equivalent shaft sealing with O-rings bearing bush of brass test pressure: design pressure x 1,1 bar for tightness DN 80 face to face: 39 mm AT60 fitted with pneumatic actuator, type. AT 60.DR - double acting - air supply necessary: 6 bar 423 fitted with 3/2-5/2-way solenoid-valve, make FESTO, type NVF3-MOH-5/2-K-1/4 voltage: 24 V DC - Namur interface - protection IP 65 incl. screw connection, rotable for 6/8 hose, pluggable 622a1 fitted with 2 proximity sensors make: P+F, type: NBN4-12GM50-E2 inductive, 3-wire, NO-function pnp voltage: 10-30 V DC, with LED mounted in limit switch box type EPE-2I01-029-16-MA-DAE-V4 incl. Namur mounting bracket with lateral cable gland + cable for solenoid valve a8283 - wiring plan no. TJB-42-10-0-0-25-0-1-01

A pedido

Saiba o preço

a5744

Dichtungs- und Verschleißteilsatz für pneum. Drehantrieb,Typ: AT 220.DR

A pedido

Saiba o preço

a5748

Dichtungs- und Verschleißteilsatz für pneum. Drehantrieb,Typ: AT 900.DR/SC

A pedido

Saiba o preço

1 2 3 4 5 6

O site contém apenas uma pequena parte dos itens do catálogo WAREX Valve.

Se não encontrou o artigo de que necessita, envie um pedido para o email [email protected] e com certeza lhe enviaremos uma proposta comercial.

Sobre o fabricante

Nosso catálogo contém uma linha completa de produtos da WAREX Valve a bons preços e entregues em qualquer região de United States , incluindo sua cidade: Dublin . Nossos gerentes ajudarão você a escolher e comprar produtos e peças de reposiçãoWAREX Valve após enviar o formulário de inscrição.Para saber preços e prazos de entrega, por favor de feedback ou envie uma descrição dos itens necessários para o endereço de e-mail

Aqui você pode comprar produtos de outras marcas

Envie uma solicitação

Entraremos em contato e responderemos a qualquer pergunta.